个人在ROS工程使用Protobuf的模板和一点心得
从上周搞定ROS工程下使用Protbuf的问题后，陆续对原有工程进行了更改，在这一过程中，探索了下Protobuf与ROS工程结合的不同方式，暂时总结了一份模板，并在此记录下心得。1. 使用 Proto 的 ROS 节点在这贴下个人使用的范例：
.
├── CMakeLists.txt
├── include
│ └── map
│ ├── map.cpp
│ └── map.h
├── package.xml
├── proto
│ └── map.proto
└── src
└── map_node.cpp个人在尝试不同的组织结构的过程中，也试过把proto文件单独设置一个节点，后续节点只需要添加即可，不需要都更改CmakeLists.txt文件。但对比Apollo工程发现，这样做会使工程目录不够清晰，不能直观地看到工程中是否引用了proto文件。再三考虑后还是决定每个节点单独设置proto文件夹来存在proto文件，这样更清晰直观。
<hr/>2. CmakeLists.txt模板
目前最终效果如下：
cmake_minimum_required(VERSION 2.8.3)
project(map)
find_package(catkin REQUIRED COMPONENTS
roscpp
std_msgs
)
## System dependencies are found with CMake&#39;s conventions
list(APPEND CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/cmake)
include(FindProtobuf)
find_package(Protobuf REQUIRED)
set(proto_dir ${PROJECT_SOURCE_DIR}/proto)
file(GLOB proto_files &#34;${proto_dir}/*.proto&#34;)
# Set up destination directories
catkin_destinations()
set(proto_gen_dir ${CATKIN_DEVEL_PREFIX}/${CATKIN_GLOBAL_INCLUDE_DESTINATION}/${PROJECT_NAME})
set(proto_gen_cpp_dir ${proto_gen_dir})
file(MAKE_DIRECTORY ${proto_gen_dir})
file(MAKE_DIRECTORY ${proto_gen_cpp_dir})
set(protogen_include_dirs ${proto_gen_cpp_dir}/../ ${proto_gen_python_dir})
# Create lists of files to be generated
set(proto_gen_cpp_files &#34;&#34;)
foreach(proto_file ${proto_files})
get_filename_component(proto_name ${proto_file} NAME_WE)
list(APPEND proto_gen_cpp_files
${proto_gen_cpp_dir}/${proto_name}.pb.h
${proto_gen_cpp_dir}/${proto_name}.pb.cc
)
endforeach(proto_file ${proto_files})
# Run protoc and generate language-specific headers.
add_custom_command(
OUTPUT ${proto_gen_cpp_files}
COMMAND ${PROTOBUF_PROTOC_EXECUTABLE} --proto_path=${proto_dir} --cpp_out=${proto_gen_cpp_dir} ${proto_files}
DEPENDS ${PROTOBUF_PROTOC_EXECUTABLE} ${proto_files}
WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
)
set_source_files_properties(${proto_gen_cpp_files} PROPERTIES GENERATED TRUE)
add_custom_target(${PROJECT_NAME}_generate_headers
DEPENDS ${proto_gen_cpp_files}
)
# Create proto library for lining.
include_directories(${PROTOBUF_INCLUDE_DIR} ${PROTOBUF_INCLUDE_DIR}/../../)
add_library(${PROJECT_NAME}_proto ${proto_gen_cpp_files})
target_link_libraries(${PROJECT_NAME}_proto ${PROTOBUF_LIBRARY})
add_dependencies(${PROJECT_NAME}_proto ${PROJECT_NAME}_generate_headers)
catkin_package(
INCLUDE_DIRS ${protogen_include_dirs}
LIBRARIES ${PROJECT_NAME}_proto
)
install(TARGETS ${PROJECT_NAME}_proto
ARCHIVE DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
LIBRARY DESTINATION ${CATKIN_PACKAGE_LIB_DESTINATION}
RUNTIME DESTINATION ${CATKIN_PACKAGE_BIN_DESTINATION}
)
install(DIRECTORY ${proto_gen_cpp_dir}/
DESTINATION ${CATKIN_PACKAGE_INCLUDE_DESTINATION}
FILES_MATCHING PATTERN &#34;*.h&#34;
)
catkin_package(
INCLUDE_DIRS include
)
include_directories(
${catkin_INCLUDE_DIRS}
${PROTOBUF_INCLUDE_DIR}
${CATKIN_DEVEL_PREFIX}
include
)
add_library(${PROJECT_NAME}
include/${PROJECT_NAME}/map.cpp
)
add_executable(map_node
src/map_node.cpp
include/${PROJECT_NAME}/map.cpp
)
target_link_libraries(${PROJECT_NAME}_node
${catkin_LIBRARIES}
${PROTOBUF_LIBRARIES}
${Boost_FILESYSTEM_LIBRARY}
${Boost_SYSTEM_LIBRARY}
)在使用中，有以下几点需要注意：
[*]使用时必须保证节点根目录下存在proto文件夹，并放置好proto文件，否则会提示无目标文件错误；
[*]使用时需对应修改下与节点名称相关的变量
[*]注意：生成的proto文件存在于devel目录inlude文件夹下，对应生成节点名称的文件夹，下面存在生成的变量。
[*]include_directories目录中包含${CATKIN_DEVEL_PREFIX}宏，之后才可以引用devel文件目录中的proto生成文件；
有碰到error: ‘__s_getMD5Sum’ 问题吗?
页:
[1]